After the 2012 model year vehicles (including 2012 model year) for only a specified diagnostic tools for tire pressure sensors read operation.
Tire pressure monitoring system is working properly before the body control module is to be recorded for each position tire pressure sensor ID information, use the following method after replacing a tire or wheel speed sensor reads the tire pressure sensors. Specific methods are as follows:
1. gearshift lever in "P", the ignition switch is turned to ON, enter the tire pressure by DIC display interface, while DIC shows "Press Set / Ctrl key to re-learn" and press the Set / Ctrl key, turn lights start 3 seconds and the horn beep sound twice to enter the learning mode.
2. Start from the left front wheel, the J-46079 or Diagnostic Tool EL-50448 antenna up against the valve core position, close to the rim of the tire sidewall, press the tool start switch, when the horn beep indicates uttered read the tire pressure sensor information.
3
3. turn on the right front as described above - a read-in process left rear wheel speed sensor, when the end of the learning process, turn signals and horn starts 3 seconds beep sound twice - right after.
More relation product search:WOBD2 Blog
VXDIAG VCX NANO
No comments:
Post a Comment